Project Description
PROBES
Remote température
Measuring range: -55°C to +125°C
Resolution: 0,6°C
Temperature (internal)
Range: -25°C to +70°C
Resolution: 0,6°C
APPLICATIONS
Indoor or outdoor
Accurate monitoring of local temperatures for buildings, monuments, bridges, dams, engineering structures…
Each sensor is autonomous; it doesn’t need another box nor a sending station
SENSOR
IoT, LoRa, LoRaWAN™
High capacity Li-ion cell
10,5cm x 10,5cm x 6cm
Operating temperature: -30°C to +85°C
1 to 4 probes per sensor
separateurwebpdf
Description
Autonomous sensor with remote NTC to for accurate temperature measurement.
Each sensor is autonomous; it does not need another box or a sending station
Applications
Surveillance in buildings, bridges, tunnels, structures.
pagebreak
Sensor characteristics
Data recording
| Local measurement interval | 1 second (via Bluetooth application) |
| Data reporting interval | 10 minutes (configurable) |
| Reported data | Remote temperature (1 to 4) |
| Case temperature | |
| Battery voltage |
Temperature probe
| Measurement principle | NTC |
|---|---|
| Measuring range | -55 … +125°C |
| Resolution | 0,6°C (-5 … +50°C) |
pagebreak
Long distance radio
| Radio technology | LoRaWAN |
|---|---|
| Security | AES-128 data encryption |
| Supported features | LoRa private or operated, OTAA |
| Radio range | Up to 15 km |
| Transmitted power | Up to 20 dBm (adaptive) |
| Receiver sensitivity | -142 dBm |
| Frequency band | 868 MHz (EU), 915MHz (US, AS, AU) |
| Antenna | Internal or external to the housing |
Local radio
| Radio technology | Bluetooth Low Energy |
|---|---|
| Radio range | Up to40m |
| Transmitted power | Up to 4 dBm |
| Receiver sensitivity | -96 dBm |
| Frequency band | 2.4 GHz ISM |
| Antenna | Internal to the box |
pagebreak
Power Supply
| Battery type | Lithium-Ion | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Power consumption | < 1mW | ||||||||||
| Battery life * |
|
* Indicative duration, for use in the conditions of use
Sensor
| Operating temperature | -30 … +85°C |
|---|---|
| Dimension | 105 x 105 x 60 mm |
| Weight | 280g |
| Internal memory | 1024 measurements |
| Case | Polycarbonate (weather, UV and impact resistant) |
| Decompressor against condensation | |
| IP65, IK07 | |
| Fixing brackets |
pagebreak
Order references
Order references
| ADLt-01 | temperature sensor with 1 probe, 1m cable |
|---|---|
| ADLt-01-xx | temperature sensor with 1 probe, with specific cable length |
| ADLt-02 | temperature sensor with 2 probes, 1m cable |
| ADLt-02-xx | temperature sensor with 2 probes, with specific cable length |
| ADLt-03 | temperature sensor with 3 probes, 1m cable |
| ADLt-03-xx | temperature sensor with 3 probes, with specific cable length |
| ADLt-04 | temperature sensor with 4 probes, 1m cable |
| ADLt-04-xx | temperature sensor with 4 probes, with specific cable length |
Other options : contact us
pagebreak
Warnings
Specifications and information in this document are subject to change without notice.
A3IP products are not warranted or licensed for use as a critical component for medical or other life-saving or life-sustaining applications, or other applications where failure could reasonably be expected to cause serious injury, death, or damage to any structure, work or building.
In addition, devices are indications and decision aids and cannot be used in alarm or critical applications.
Contact
https://www.a3ip.com
contact@a3ip.com
+33 (0)2 40 94 78 41
A3IP
Bâtiment Placel
Route de Vannes
44880 SAUTRON
France
