Project Description

ADLp
PROBES
Displacement

Measuring range: 25mm (up to 200mm)
Resolution: <±2μm (25mm)

Temperature (internal or remote)

Range: -25°C to +70°C
Resolution : 0,6°C

APPLICATIONS

Indoor or outdoor
Cracks monitoring (1 to 3 axes) for buildings, monuments, bridges, dams, engineering structures…
Monitoring of joints on structures

Each sensor is autonomous; it doesn’t need another box nor a sending station

SENSOR

IoT, LoRa, LoRaWAN™
High capacity Li-ion cell
10,5cm x 10,5cm x 6cm
Operating temperature: -30°C to +85°C
1 to 4 probes per sensor

separateurwebpdf

Description

Autonomous sensor with probes; they are linear potentiometers measuring extremely small displacements.
They measure the cracks evolution or the contraction or joints extension.
Combined, several sensors can be used to monitor cracks in 3D.
Each sensor is autonomous; it does not need another box or a sending station

Applications

Monitoring in buildings, bridges, pipelines, dams.

pagebreak
OPTIONS

Probe can be supplied with mounting base and stop.

pagebreak
Sensor characteristics
Data recording
Local measurement interval  1 second (via Bluetooth application)
Data reporting interval 10 minutes (configurable)
Reported data Probe distance (1 to 4)
Case temperature
Battery voltage
Motion probe
Measurement principle Potentiometric
Measuring range 0 … 25mm (50, 75, 100, 125, 150, 175, 200
mm optional)
Resolution < 2 µm
Repeatability < 5 µm
Linearity ±0,1%
Operating temperature -60 … +150°C
Temperature sensor inside the housing
Measuring principle NTC
Measuring range -55 … +125°C
Resolution 0,6°C (-5 … +50°C)

pagebreak
Long distance radio
Radio technology LoRaWAN
Security AES-128 data encryption
Supported features LoRa private or operated, OTAA
Radio range Up to 15 km
Transmitted power Up to 20 dBm (adaptive)
Receiver sensitivity -142 dBm
Frequency band 868 MHz (EU), 915MHz (US, AS, AU)
Antenna Internal or external to the housing
Local radio
Radio technology Bluetooth Low Energy
Radio range Up to 40m
Transmitted power Up to 4 dBm
Receiver sensitivity -96 dBm
Frequency band 2.4 GHz ISM
Antenna Internal to the box

pagebreak
Power Supply
Battery type Lithium-Ion
Power consumption < 1mW
Battery life *
Measurement period Duration (up to)
10 minutes 5 years
20 minutes 10 years
30 minutes 15 years
1 hour 15 years

* Indicative duration, for use in the conditions of use

Sensor
Operating temperature -30 … +85°C
Dimension 105 x 105 x 60 mm
Weight 280g
Internal memory 1024 measurements
Case Polycarbonate (weather, UV and impact resistant)
Decompressor against condensation
IP65, IK07
Fixing brackets

pagebreak
Order references
Order references
ADLp-01-25 Fissurometer with 1 probe (stroke 25mm, cable length 1m)
ADLp-01-xx fissurometer with 1 probe (specific stroke and cable length*)
ADLp-02-25 fissurometer with 2 probes (25mm stroke, 1m cable length)
ADLp-02-xx fissurometer with 2 probes (specific stroke and cable length*)
ADLp-03-25 fissurometer with 3 sensors (25mm stroke, 1m cable length)
ADLp-03-xx fissurometer with 3 probes (specific stroke and cable length*)
ADLp-04-25 fissurometer with 4 sensors (25mm stroke, 1m cable length)
ADLp-04-xx fissurometer with 4 probes (specific stroke and cable length*)

* stroke up to 200mm, cable length 1m as standard

Other options : contact us

pagebreak
Warnings

Specifications and information in this document are subject to change without notice.

A3IP products are not warranted or licensed for use as a critical component for medical or other life-saving or life-sustaining applications, or other applications where failure could reasonably be expected to cause serious injury, death, or damage to any structure, work or building.

In addition, devices are indications and decision aids and cannot be used in alarm or critical applications.

Contact

https://www.a3ip.com

contact@a3ip.com

+33 (0)2 40 94 78 41

A3IP
Bâtiment Placel
Route de Vannes
44880 SAUTRON
France

INFORMATION REQUEST