Project Description

ADLc
PROBES
Displacement

Measuring range: 200mm (cable extension possible)
Resolution: <±20μm

Temperature (internal or remote)

Range: -25°C to +70°C
Resolution : 0,6°C

APPLICATIONS

Indoor or outdoor
Remote monitoring for buildings or structures at risk, monuments, engineering structures, geology, …

Each sensor is autonomous; it doesn’t need another box nor a sending station

SENSOR

IoT, LoRa, LoRaWAN™
High capacity Li-ion cell
10,5cm x 10,5cm x 6cm
Operating temperature: -30°C to +85°C
1 to 4 probes per sensor

separateurwebpdf

Description

Autonomous sensor with windable cables; they are linear potentiometers measuring small displacements over long distances. They allow to measure the evolution of cracks, the displacement of walls.

With the help of a steel cable, the measuring length is easily extended.

Each sensor is autonomous; it does not need another box or a sending station

Applications

Monitoring of buildings or structures at risk, monuments, works of art, geology.

pagebreak
Sensor characteristics
Data recording
Local measurement interval 1 second (via Bluetooth application)
Data reporting interval 10 minutes (configurable)
Reported data Distance (1 to 4)
Case temperature
Battery voltage
Motion probe
Measurement principle Potentiometric, steel cable with spring return
Measuring range 0 … 200mm
Resolution < 20 µm
Repeatability < 50 µm
Linearity ±0,1%
Starting force Max 1kg
Temperature sensor inside the housing
Measuring principle NTC
Measuring range -55 … +125°C
Resolution 0,6°C (-5 … +50°C)

pagebreak
Long distance radio
Radio technology LoRaWAN
Security AES-128 data encryption
Supported features LoRa private or operated, OTAA
Radio range Up to 15 km
Transmitted power Up to 20 dBm (adaptive)
Receiver sensitivity -142 dBm
Frequency band 868 MHz (EU), 915MHz (US, AS, AU)
Antenna Internal or external to the housing
Local radio
Radio technology Bluetooth Low Energy
Radio range Up to 40m
Transmitted power Up to 4 dBm
Receiver sensitivity -96 dBm
Frequency band 2.4 GHz ISM
Antenna Internal to the box

pagebreak
Power supply
Battery type Lithium-Ion
Power consumption < 1mW
Battery life *
Measurement period Duration (up to)
10 minutes 5 years
20 minutes 10 years
30 minutes 15 years
1 hour 15 years

* Indicative duration, for use in the conditions of use

Sensor
Operating temperature -30 … +85°C
Dimension 105 x 105 x 60 mm
Weight 280g
Internal memory 1024 measurements
Case Polycarbonate (weather, UV and impact resistant)
Decompressor against condensation
IP65, IK07
Fixing brackets

pagebreak
Order references
Order references
ADLc-01 distance meter with 1 cable sensor (stroke 20cm, connection cable length 1m)
ADLc-01-xx distance meter with 1 cable sensor (specific stroke and cable length*)
ADLc-02 distance meter with 2 cable sensors (stroke 20cm, connection cable length 1m)
ADLc-02-xx distance meter with 2 cable sensors (specific stroke and cable length*)
ADLc-03 distance meter with 3 cable sensors (stroke 20cm, connection cable length 1m)
ADLc-03-xx distance meter with 3 cable sensors (specific stroke and cable length*)
ADLc-04 distance meter with 4 cable sensors (stroke 20cm, connection cable length 1m)
ADLc-04-xx distance meter with 4 cable sensors (specific stroke and cable length*)

* stroke up to 100m (steel cable), connection cable length 1m as standard

Other options : contact us

pagebreak
Warnings

Specifications and information in this document are subject to change without notice.

A3IP products are not warranted or licensed for use as a critical component for medical or other life-saving or life-sustaining applications, or other applications where failure could reasonably be expected to cause serious injury, death, or damage to any structure, work or building.

In addition, devices are indications and decision aids and cannot be used in alarm or critical applications.

Contact

https://www.a3ip.com

contact@a3ip.com

+33 (0)2 40 94 78 41

A3IP
Bâtiment Placel
Route de Vannes
44880 SAUTRON
France

INFORMATION REQUEST