Accelerations (X, Y, Z)
Rzsolution: <0,5 mg
Temperature (internal or remote)
Range: -25°C to +70°C
Resolution : 0,6°C
Indoor or outdoor
Shock monitoring for buildings, abutments or piles of bridges, dams, engineering structures, earthworks, …
Shock monitoring on rails, catenary poles or pylons
Each sensor is autonomous; it doesn’t need another box nor a sending station
High capacity Li-ion cell
10,5cm x 10,5cm x 6cm
Operating temperature: -30°C to +85°C
Autonomous sensor equipped with MEMS probes measuring accelerations with very high accuracy. The threshold triggering allows an early warning of abnormal behavior.
No installation constraints; flexible use with its 3 measuring axes.
Each sensor is autonomous; it does not need another box or a sending station
Monitoring in the fields of railroads, building, bridges, structures, monuments, natural risks or geology.
Measurement axes are clearly identified to ease installation.
Sensor can be delivered with mounting plates.
Magnetic holder also available.
|Local measurement interval||1 second (via Bluetooth application)|
|Data reporting interval||20 minutes (configurable)|
|Reported data||Accelerations (X, Y, Z)|
Temperature sensor inside the housing
|Measuring range||-55 … +125°C|
|Resolution||0,6°C (-5 … +50°C)|
Long distance radio
|Security||AES-128 data encryption|
|Supported features||LoRa private or operated, OTAA|
|Radio range||Up to 15 km|
|Transmitted power||Up to 20 dBm (adaptive)|
|Receiver sensitivity||-142 dBm|
|Frequency band||868 MHz (EU), 915MHz (US, AS, AU)|
|Antenna||Internal or external to the housing|
|Radio technology||Bluetooth Low Energy|
|Radio range||Up to 40m|
|Transmitted power||Up to 4 dBm|
|Receiver sensitivity||-96 dBm|
|Frequency band||2.4 GHz ISM|
|Antenna||Internal to the box|
|Power consumption||< 1mW|
|Battery life *||
* Indicative duration, for use in the conditions of use
|Operating temperature||-30 … +85°C|
|Dimension||105 x 105 x 60 mm|
|Internal memory||1024 measurements|
|Case||Polycarbonate (weather, UV and impact resistant)|
|Decompressor against condensation|
|AcL||16g shock sensor with adjustable threshold|
|AcL-AiL||16g shock sensor with adjustable threshold and 3 axis inclinometer|
|xxx-2pl||with double mounting plate|
|xxx-mag||with magnetic fixing plate|
Other options: contact us
Specifications and information in this document are subject to change without notice.
A3IP products are not warranted or licensed for use as a critical component for medical or other life-saving or life-sustaining applications, or other applications where failure could reasonably be expected to cause serious injury, death, or damage to any structure, work or building.
In addition, devices are indications and decision aids and cannot be used in alarm or critical applications.
+33 (0)2 40 94 78 41
Route de Vannes