Project Description

ADLp
PROBES
Shock

Accelerations (X, Y, Z)
Rzsolution: <0,5 mg

Tilt

3 axes on 360°
Resolution : 0,005°

Temperature (internal or remote)

Range: -25°C to +70°C
Resolution : 0,6°C

APPLICATIONS

Indoor or outdoor
Shock monitoring for buildings, abutments or piles of bridges, dams, engineering structures, earthworks, …
Shock monitoring on rails, catenary poles or pylons

Combined with movements monitoring

Each sensor is autonomous; it doesn’t need another box nor a sending station

SENSOR

IoT, LoRa, LoRaWAN™
High capacity Li-ion cell
10,5cm x 10,5cm x 6cm
Operating temperature: -30°C to +85°C

separateurwebpdf

Description

Autonomous sensor equipped with MEMS probes measuring accelerations and movements with very high accuracy. The threshold triggering allows an early warning of abnormal behavior.

No installation constraints; flexible use with its 3 measuring axes.

Each sensor is autonomous; it does not need another box or a sending station

Applications

Monitoring in the fields of railroads, building, bridges, structures, monuments, natural risks or geology.

pagebreak

Measurement axes are clearly identified to ease installation.

Mounting plates

Sensor is delivered with magnetic plate

Il peut également être livré avec des plaques de fixation.

pagebreak
Sensor characteristics
Data recording
Local measurement interval 1 second (via Bluetooth application)
Data reporting interval 30 minutes (configurable)
Reported data Accelerations (X, Y, Z)
Angles (X, Y, Z)
Case temperature
Battery voltage
Shock probe
Measurement principle Mems
Measuring range ±16g
Resolution <0.5mg
Motion probe
Measurement principle Mems
Measuring range 360°
Resolution 0,005° over ±10°
Repeatability 0,02°
Temperature sensor inside the housing
Measuring principle NTC
Measuring range -55 … +125°C
Resolution 0,6°C (-5 … +50°C)

pagebreak
Long distance radio
Radio technology LoRaWAN
Security AES-128 data encryption
Supported features LoRa private or operated, OTAA
Radio range Up to 15 km
Transmitted power Up to 20 dBm (adaptive)
Receiver sensitivity -142 dBm
Frequency band 868 MHz (EU), 915MHz (US, AS, AU)
Antenna Internal or external to the housing
Local radio
Radio technology Bluetooth Low Energy
Radio range Up to 40m
Transmitted power Up to 4 dBm
Receiver sensitivity -96 dBm
Frequency band 2.4 GHz ISM
Antenna Internal to the box

pagebreak
Power Supply
Battery type Lithium-Ion
Power consumption < 1mW
Battery life *
Measurement period Duration (up to)
30 minutes 5 years
1 hour 10 years

* Indicative duration, for use in the conditions of use

Sensor
Operating temperature -30 … +85°C
Dimension 105 x 105 x 60 mm
Weight 280g
Internal memory 1024 measurements
Case Polycarbonate (weather, UV and impact resistant)
Decompressor against condensation
IP65, IK07
Fixing brackets

pagebreak
Order references
Order references
AcL-AiL-mag 16g shock sensor with adjustable threshold,  3-axis inclinometer and magnetic fixing plate
AcL 16g shock sensor with adjustable threshold
xxx-2pl with double mounting plate

Other options: contact us

pagebreak
Warnings

Specifications and information in this document are subject to change without notice.

A3IP products are not warranted or licensed for use as a critical component for medical or other life-saving or life-sustaining applications, or other applications where failure could reasonably be expected to cause serious injury, death, or damage to any structure, work or building.

In addition, devices are indications and decision aids and cannot be used in alarm or critical applications.

Contact

https://www.a3ip.com

contact@a3ip.com

+33 (0)2 40 94 78 41

A3IP
Bâtiment Placel
Route de Vannes
44880 SAUTRON
France

INFORMATION REQUEST